▷ How to know the data of my hard drive or ssd ⭐️

The HDD or SSD storage unit is a very important component of a PC, as it permanently stores all the data processed by the CPU. This is usually the slowest component, but can be faster if you select the correct drive type. Older hard drives were HDDs, which are still widely used because they are cheaper compared to other alternatives. The new type of hard drives are solid state drives (SSDs) that are expensive but are much faster than hard drives.

Index of contents

The easiest ways to know the data on your hard drive or SSD

Today we talk about how to detect what type of hard drive or SSD has been installed on your PC. There are quite a few ways to determine the type of drive in Windows, but we'll look at 4 main ways to do it. Knowing the model and characteristics of our storage unit is the first step towards improving the performance of our PC.

Using the Windows System Information Tool

The Windows System Information Tool is a wonderful tool for resolving hardware conflicts, as well as obtaining a basic level of information about every component of the PC. The system information tool is a built-in tool in Windows that is available in all versions of Windows, including Windows XP, Windows Vista, Windows 7, Windows 8 and Windows 10.

To open the system information tool, go to Run -> msinfo32

A new window will open. You need to go to Components -> Storage -> Disks. The panel on the right will give you detailed information about each hard drive connected to the system. The information has no headings, so you will have to find out the details of each hard drive carefully.

Using the Disk Defragmenter Tool

There is an easier way to check if your hard drive is HDD or SSD. Just open the Disk Defragmenter tool in Windows, which displays the drive type while listing the drives on the system. Although this method is simpler, we would recommend the first method, as it provides more details about your system's storage drive. This will generally work on any system where the disks are not connected to a RAID card.

CristalDiskInfo

If you are a technology expert and you come across many PCs and want to see the details of the storage unit of all of them, you must use third party software. In this case we focus on CristalDiskInfo, a very simple and free tool but one that provides us with a large amount of information. CristalDiskInfo allows us to know the health status of an HDD or SSD, the hours it has been in operation, the number of power-ups, the amount of data written to an SSD, the temperature of the unit and much more. If the state of health appears in yellow it is time to go looking for a replacement, if it appears in red, you do not have much time left before it fails.

WE RECOMMEND YOU Differences between 60, 120, 144 and 240 Hz monitors. Is it worth it?

Piriform Speccy

Piriform Speccy is another great free tool that we can use to know the data of our storage unit. This software offers us many possibilities, since it informs us about the characteristics of a lot of components of our PC. It also informs us about the status of the unit and its parameters, in a very similar way to CristalDiskInfo.

You can use the tools mentioned above to check the status of the hard drive on your Windows PC. If you don't need additional details, then the built-in Windows tools should work very well. Otherwise, it is recommended to download a hard disk health check tool. Speccy and CristalDiskInfo will also inform you about the spin speed of traditional hard drives, one of the most important data when determining their performance.

We recommend reading our guides on:

This ends our article on how to know the data on my hard drive or SSD, you can leave a comment to share with other users what is your preferred method. Remember to share the article with your friends on social networks, so you can reach more people who need it.