Mars gaming mgc2 review

Most fans of the PC world spend many hours sitting in front of the screen , we tend to worry a lot about our keyboard, mouse, monitor… but many times we do not give our chair the attention it deserves. Mars Gaming comes to help us with its Mars Gaming MGC2 chair so that we can enjoy maximum comfort in our hours in front of the screen. The Mars Gaming MGC2 is a modern gaming chair specifically designed to satisfy the most demanding users, among whom are non- gamers.

First of all, we thank Mars Gaming for the trust placed in giving us the MGC2 gaming chair for analysis:

Mars Gaming MGC2 technical specifications

The Mars Gaming MGC2 has a seat made of high quality nylon with dimensions of 53 x 48 x 7.5 cm and a backrest made of the same material with dimensions of 77 x 54 cm. Two comfortable armrests will serve as connecting pieces for the seat and backrest as well as being foldable for greater comfort if the situation requires it.

The chair has five PVC wheels for a comfortable movement despite its high weight of 14 Kg, these wheels are attached to the base in the shape of a five-pointed star and also made of PVC (Plastic) material. Finally, we highlight its padded headrest and the adjustable lifting system up to 8 cm.

Mars Gaming MGC2 Unboxing

The Mars Gaming MGC2 chair comes completely disassembled in a large cardboard box, inside it we find all the parts and the screws / tools necessary for its assembly. The pieces come very well protected and packaged inside the box so that they reach the end user in the best possible condition, as always Mars Gaming puts a lot of care into the presentation of its products.

Inside the box we find the following pieces:

1 Seat. 1 Backrest. 2 Armrest. 1 Star with five legs. 1 Adjustable lifting cylinder with gas piston. 1 Three-part cylinder trim telescope. 1 pillar piece with tilt lock lever and control. lifting height. 1 Allen wrench for the different screws. Screws for mounting and four washers. 8 trim caps for the screws. 5 PVC wheels. One cushion with elastic rubber.

So let's move on to see in detail each of the pieces that are part of the Mars Gaming MGC2 chair; First we see the star on which the five legs of the chair are located, all of it made of good quality PVC material. In each of the tips we must insert one of the wheels.

We continue to see the two pieces that make the armrest and that also serve to unite the seat of the chair with its backrest, the two pieces are articulated and once assembled they can be rotated 90º in case we do not want to use the armrests or to bring the chair closer to our desk when we are not using it.

Next we see the small pillow with a built-in elastic rubber that serves to place it on the back of the back of the chair to be able to support the head in a more comfortable way.

We come to the mounting piece that is located under the back of the chair, it has a lever with which we will control the elevation of the chair and internal springs to allow the chair to tilt if the user wishes. We also see the hole in which the bar with adjustable elevation is inserted.

We arrive at a cardboard box inside which we find the bag with the screws, the five PVC wheels and the adjustable lifting bar together with a three-part beautifying telescope.

We come to the seat of the chair, a piece that is built with a lot of quality and in which we find shades of black and red so typical of Mars Gaming. The central area is built with breathable fabric for less sweating during the use of the chair.

The backrest piece, made of the same materials and colors as the seat and with two large holes in the middle-back. We highlight its attractive design that, like the seat, reminds us of sports car seats. On the upper back we see the Mars Gaming logo.

Finally we find a simple manual that shows us the steps to carry out for the assembly of the chair, something very really simple and that will not cause problems for any user, in fact this was the first chair that I have assembled myself and it has very simple result despite not having any previous experience.

Mars Gaming MGC2 mount

The assembly of the Mars Gaming MGC2 chair is very simple and we can summarize it in several steps. First we press-fit the 5 wheels on each of the tips of the star.

Finally, we only have to place the trims on the eight screws that we have placed in the armrests. When we have already joined the seat and the two armrests, we fit the mounting piece that we had put under the seat with the adjustable lift piston. mounting piece on the back of the seat, we have to match the four holes in the piece with those of the seat and place the four washers and the four finest screws which we will tighten with the included allen key. We have to make sure to put the piece well, the part of the piece where "Front" has to be facing forward, that is, the "plug" that the piece has has to be closer to the front of the seat. The lever must be on the right side of the chair. First we pressurize the 5 wheels on each of the tips of the star. We place the piston in the center of the star with the five legs and then we put the beautifying telescope on it of three parts. We do not need to force it, nor do we have to touch the piston, much less manipulate it, since we can damage it. It is not convenient for us to tighten the screws too much to later adjust the backrest correctly. screws on each side of the backrest. We recommend placing the two lower side screws first and then the two upper ones, it has been easier for me in this way, in any case we must arm ourselves with patience because it is the step that will cost us the most.Place the cushion with elastic rubber and enjoy your new chair?

WE RECOMMEND YOU Mars Gaming MK6 Review in Spanish (Full Review)

Mars Gaming MGC2 mounted

Once we have the Mars Gaming MGC2 chair assembled, we leave you a gallery with images to show you the attractive design it presents and its appearance once all the pieces that compose it are united.

Use experience and conclusion

Mars Gaming has accustomed us to excellent peripherals with very competitive prices, now the brand makes the leap into the gaming chair market with the excellent MGC1 and MGC2 . We have analyzed the Mars Gaming MGC2 which is the superior model, we can safely say that it is one of the best gaming chairs for its price. The Mars Gaming MGC2 is a really very comfortable chair that will make your hours sitting in front of the screen fly by and you will not feel tired. Its construction is made with high quality materials and its cleaning is very easy.

As for the adjustable elevation system (8cm) it works perfectly with a route that will be sufficient for most users, although some could miss a couple of centimeters more in height. The piston travel is very smooth and transmits a lot of safety. The armrests help us to unload the weight of our arms and relieve the shoulders, if they do not bother to write we can fold them up without any problem as well as to bring the chair closer to our desk when we are not using it.

The inclination of the chair is what least convinced me, to tilt it we have to take the lift control lever and pull it slightly outwards, with this we will see how the seat and backrest assembly lean back. What I don't like about this system is that it does not allow you to lock the tilt so it is very easy to make the chair swing back and forth. Personally I have missed the possibility of tilting the back of the chair, although I understand that the necessary mechanism for doing so would make it more expensive.

Finally, the displacement of the chair on the ground is very smooth and we do not need to do hardly any force, all thanks to its five PVC (Plastic) wheels that allow us to move the chair in a very comfortable way despite its high weight. with its 14 Kg .

The Mars Gaming MGC2 has a sale price of 125 euros in leading online stores.

ADVANTAGE	DISADVANTAGES
+ GREAT CONSTRUCTION QUALITY.	- NON-TILTING BACK
+ FOLDING ARMRESTS.	- NON-LOCKABLE TILT.
+ ATTRACTIVE AND VERY COMFORTABLE DESIGN.
+ ADJUSTABLE LIFT.
+ POSSIBILITY OF TILTING THE CHAIR.