Nzxt updates its h series with 6 new chassis with the h510 elite in the lead
Table of contents:
-
The front panel is updated, now with a USB 3.1 Gen1 Type-C port, and of course the microcontroller, the Smart Device V2 . This is capable of controlling two HUE 2 lighting channels and the RPM of up to 3 fans with PWM signal and with a 0 dB function that already comes from the previous generation. All this will be possible to manage through the NZXT CAM software .
We must say that this controller offers the same support as the previous one, with only three connectors for ventilation, while these chassis normally support a total of 4 or 5 fans. One positive thing is that now they do offer compatibility with HUE 2 lighting strips.
The possibility of vertically installing GPUs and capacity for 240 and 360 mm cooling system with removable panel and high quality filters also remain.
NZXT H510 Elite is the brand new Premium chassis
- Availability and price
- Specifications list
NZXT has taken advantage of Computex 2019 to give a new life to its range of chassis of the prestigious H series. Specifically, a total of six new models with normal and i variants have been presented, leading an impressive NZXT H510 Elite as Premium chassis. We'll give all the details about it below, so let's get started.
The front panel is updated, now with a USB 3.1 Gen1 Type-C port, and of course the microcontroller, the Smart Device V2. This is capable of controlling two HUE 2 lighting channels and the RPM of up to 3 fans with PWM signal and with a 0 dB function that already comes from the previous generation. All this will be possible to manage through the NZXT CAM software.
We must say that this controller offers the same support as the previous one, with only three connectors for ventilation, while these chassis normally support a total of 4 or 5 fans. One positive thing is that now they do offer compatibility with HUE 2 lighting strips.
The possibility of vertically installing GPUs and capacity for 240 and 360 mm cooling system with removable panel and high quality filters also remain.
NZXT H510 Elite is the brand new Premium chassis
We continue with the chassis that NZXT has baptized with the surname Elite, since it presents more interesting news than the previous models in addition to a more forceful aesthetic and that you can enjoy seeing the images.
As for the things that remain unchanged with respect to the models previously seen, we can mention the tempered glass panel in the side area with simple installation, the Smart Device V2 microcontroller with all the commented features, and the optimized wiring management system inherited from the initial H series. We also have available the USB 3.1 gen1 Type-C on the front panel, vertical GPU support and panel for removable AIO installation
So what are the news? well there are, and they are in the front area. In this case, the front area has been redesigned so that it is also transparent with tempered glass. In addition, the brand has placed two 120mm AER RGB 2 fans in the front area and another in the rear area, in addition to an RGB lighting strip in this new visible area. All this can be managed through the microcontroller and the NZXT CAM software. We will have this model available in black and matt white.
Availability and price
As for availability, all models will be launched on the market in late July, but we do not know a specific date. And as for the price, here we leave the list with each model:
- H210 $ 79.99 USDH210i $ 109.99 USDH510 $ 69.99 USDH510i $ 99.99 USDH710 $ 139.99 USDH710i $ 169.99 USD
As for the NZXT H510 Elite, we will have it available again at the end of July and for a price of $ 169.99.
We recommend our guide to the best chassis on the market
Specifications list
Finally we leave the list of specifications for all models:
Model | NZXT H210 / H210i | NZXT H510 / H510i | NZXT H710 / H710i | NZXT H510 Elite |
Dimensions | Width: 210mm Height: 334mm Depth: 372mm (without feet)
Width: 210mm Height: 349mm Depth: 372mm (with feet) |
Width: 210mm Height: 435mm Depth: 428mm (without feet)
Width: 210mm Height: 460mm Depth: 428mm (with feet) |
Width: 230mm Height: 494mm Depth: 494mm (without feet)
Width: 230mm Height: 516mm Depth: 494mm (with feet) |
Width: 210mm Height: 435mm Depth: 428mm (without feet)
Width: 210mm Height: 460mm Depth: 428mm (with feet) |
Materials) | SGCC steel and tempered glass | SECC steel, tempered glass | SGCC steel and tempered glass | SGCC steel, tempered glass |
Weight | 6.0 kg | 7.0 kg | 12.27 kg | 7.48 kg |
Motherboard support | Mini-ITX | Mini-ITX, micro-ATX, ATX | Mini-ITX, micro-ATX, ATX and EATX (up to 272mm or 10.7 inches) | Mini-ITX, micro-ATX, ATX |
Front I / O ports | 1 x USB 3.1 gen 1 type-A
1 x USB 3.1 Gen 2 Type-C 1 x earphone audio jack |
1 x USB 3.1 Gen 2 Type-C
1 x USB 3.1 gen 1 type-A 1 x earphone audio jack |
1 x USB 3.1 Gen 2 Type-C
2 x USB 3.1 gen 1 type-A 1 x earphone audio jack |
1 x USB 3.1 Gen 2 Type-C
1 x USB 3.1 gen 1 type-A 1 x earphone audio jack |
Filters | All air intakes | All air intakes | All air intakes | All air intakes |
Smart Device V2
(version i only) |
3 x ventilation channels with Max 10W per channel output *
2 x RGB LED port supports up to 4 addressable HUE LED strips 2 or 5 AER RGB fans Built-in noise detection module * Note: If a splitter is used, the fan control is regulated based on the fan connected to the 4-pin port. Do not use low noise adapters. |
3 x ventilation channels with Max 10W per channel output *
2 x RGB LED port supports up to 4 addressable HUE LED strips 2 or 5 AER RGB fans Built-in noise detection module * Note: If a splitter is used, the fan control is regulated based on the fan connected to the 4-pin port. Do not use low noise adapters. |
3 x ventilation channels with Max 10W per channel output *
2 x RGB LED port supports up to 4 addressable HUE LED strips 2 or 5 AER RGB fans Built-in noise detection module * Note: If a splitter is used, the fan control is regulated based on the fan connected to the 4-pin port. Do not use low noise adapters. |
3 x channels for fans with maximum 10W per channel output *
2 x RGB LED channels, each supports up to 4 HUE addressable LED strips 2 or 5 AER RGB 2 fans Built-in noise detection module * Note: If a splitter is used, the fan control is regulated based on the fan connected to the 4-pin port. Do not use low noise adapters. |
LED strip
(version i only) |
1 integrated addressable LED strip | 2 integrated addressable LED strips | 2 integrated addressable LED strips | 2 built-in AER RGB 2 140mm fans
1 integrated addressable LED strip |
Accessories included | Installation screws
10 x cable ties 1 x Jack Splitter audio connector (4 pole to 3 pole) 1 x GPU bracket |
2 grooves | Up to 2.5 slots | 7 |
Expansion slots | two | Installation screws
10 x cable ties 1 x Jack Splitter audio connector (4 pole to 3 pole) |
Installation screws
10 x cable ties 1 x Jack Splitter audio connector (4 pole to 3 pole) |
2 grooves |
Disk bays | 2.5 ": 3 + 1
3.5 ": 1 |
7 | 7 | 2.5 ": 2 + 1
3.5 ": 2 + 1 |
Radiator bracket | Front: 2 x 120 with Pull / Push
Rear: 1 x 120 |
2.5 ": 2 + 1
3.5 ": 2 + 1 |
2.5 ": 7
3.5 ": 2 + 2 |
Front: 2 x 140 or 2 x 120mm
Rear: 1 x 120 |
Fan bracket | Front: 2 x 120/2 x 140mm
Top: 1 x 120mm (1 AER F120 box version included) Rear: 1 x 120mm (1 AER F120 box version included) |
Front: 2 x 140 or 2 x 120mm with Pull
Rear: 1 x 120 |
Front: 2 x 140 or 3 x 120mm with Push / Pull
Top: 2 x 140 or 3 x 120 Rear: 1 x 120 |
Front: 2 x 120/2 x 140mm (2 AER RGB 2 140mm included)
Upper: 1 x 120/1 x 140mm Rear: 1 x 120 |
Fan Features | AER F120 (box version)
Speed: 1200 + 200 rpm Air flow: 50.42 CFM Noise: 28 dBA Bearing: rifle bearing |
Front: 2 x 120/2 x 140mm
Top: 1 x 120/1 x 140mm (1 AER F120 box version included) Rear: 1 x 120 (1 AER F120 box version included) |
Front: 3 x 120/2 x 140mm (3 AER F120 box version included)
Upper: 3 x 120/2 x 140mm Rear: 1 x 120 (1 AER F140 box version included) |
AER RGB 2 (140mm)
Speed: 500-1500 RPM Air flow: 30.39 - 91.19 CFM Noise: 22 - 33 dBA Air pressure: 0.17 - 1.52 mm-H2O Bearing: fluid dynamic bearing Fan connector: 4-pin PWM |
Distribution | Cable management: 16.3 mm
GPU cooling: up to 325mm CPU cooler: up to 165mm Front radiator: 85mm Rear radiator: 42mm PSU length: 311mm |
AER F120 (box version)
Speed: 1200 + 200 rpm Air flow: 50.42 CFM Noise: 28 dBA Bearing: rifle bearing |
AER F120 (box version)
Speed: 1200 + 200 rpm Air flow: 50.42 CFM Noise: 28 dBA Bearing: rifle bearing AER F140 (box version) Speed: 1, 000 + 200 rpm Air flow: 68.95 CFM Noise: 29 dBA Bearing: rifle bearing |
Cable management: 19-23mm
GPU cleaning: up to 381mm CPU cooling: up to 165mm Front radiator: 60mm Rear radiator: 60mm Tank & pump: up to 180mm (along the cable bar), up to 86mm (along the bottom panel) |
Warranty | 2 years | Cable management: 19-23mm
GPU cleaning: up to 381mm CPU cooling: up to 165mm Front radiator: 60mm Rear radiator: 60mm Tank & pump: up to 180mm (along the cable bar), up to 86mm (along the bottom panel) |
Cable management: 18-22mm
GPU cleaning: up to 413mm CPU cooling: up to 185mm Front radiator: 60mm Upper radiator: 30mm Tank & pump: up to 224mm (along the cable bar) |
2 years |
2 years | 2 years |
Qnap launches the ts-x63u series: its new range of professional nas with integrated soc processor amd g-series quad
QNAP Systems, Inc. Announces Launch of New TS-x63U Series of Professional Rackmount NAS Equipped with AMD G-series Processor
Msi updates its 300 series motherboards for the new intel 'r0' cpus
MSI released BIOS updates for all Intel 300 series motherboards, which will support the upcoming Intel Core processors.
Nzxt h510 elite review in Spanish (full analysis)
NZXT H510 ELITE chassis review: technical characteristics, CPU, GPU and PSU compatibility, design, assembly, availability and price.