OR

If you have an old or modern mechanical keyboard and you are desperate with the sound when typing any word… In this article it is focused especially for you, since we are talking about the O-Ring. What is O-Ring? They are rubbers that reduce the noise emitted by your keys and dampens the impact against the switch. You want to know more? Here we go!

O-Ring how to remove annoying noise on your keyboard

When sales of the first PCs began to the public, one of the sounds that most attracted or impacted the final consumer was that provided by the keyboard. How to describe it? It had a musical sound compared to typewriters, however updates and new technologies have diminished that sound on the keyboard, so much so that now that music was transformed into an annoying noise when writing and many nights your closest relatives complained.

A few years ago the trend was the use of a membrane keyboard, but with the evolution of the gamer market and eSports equipment, the use of the mechanical keyboard has been promoted. But how to mitigate this supposed problem?

Today we bring you a solution so that you do not provoke this characteristic sound while typing and improve the health of your roommates or family member. You can get it using rubbers that serve as shock absorbers in the key pressure and this damping is provided by the famous O-Ring, in addition to reducing noise, we will obtain an improvement in writing since using it becomes more comfortable and versatile with the help from these rubber rings.

Installing O-Ring on a mechanical keyboard

There is only one way to put the O-Rings, the first thing will be to carefully take off each key when turning it (with the letters below), you will see a stem or the bottom of the key cap and that is where we will place our rubber ring This should be around the key stem.

Remaining as follows:

It is possible that when going to the store or going to online stores by O-ring they will show you infinities of them since there are several types or models of O-ring coded by their manufacturers, but we can also get them with different hardnesses and thickness that are associated to the material they use in their manufacture.

We recommend reading our guide to the best keyboards on the market.

The thickness of the and the hardness have a direct influence on the stroke when pressing the key and dampens the blow, as for example on the Cherry MX keyboard which has a stroke of 4 mm which is considerably reduced by placing a 0.4 mm WASD O-ring, without However the typing sensation changes and if you do not want this to happen to the touch then we recommend the 0.2mm O-rings that adjust the sound but it does not significantly change the sensation.

The results? Really good and we think they are more than necessary. Finally we leave you the best O-Ring on the market.

We ask you the following question: Have you used O-Ring or have you preferred to buy the quietest keyboard on the market: Corsair MX Silent ? As always thanks for reading our article.