How to change thermal paste on ps4 step by step

Is your PlayStation 4 a little noisy lately? Just starting to play and the fans are spinning out of control? Possibly one of the solutions is to change the thermal paste on the PS4 or do a good internal cleaning to improve temperatures.

And it is that as time passes, the PlayStation 4 can collect a little dirt, which can cause damage to the ventilation system and cause problems in the performance of the console itself. Do not miss our tutorial!

How to clean and replace the PS4 thermal paste step by step

In these cases, your Playstation 4 requires regular maintenance to keep it operating in the long term and also to prevent the famous BloD effect (blue light of death), related to various problems that affect its proper functioning.

Diagnosis

If your Playstation 4 has any of the following problems, it is recommended that you carry out a good cleaning of the console:

• The fan makes excessive noise during any operation Too much dust on the console The system quickly overheats The system freezes during any operation after a short period of time The fan is having trouble running or not working at all Random shutdowns console Freeze the game during the game.

In the face of these difficulties, a deep cleaning is capable of solving the problem and preparing your companion for adventures and wars. You also have the option to change the processor thermal paste if necessary.

Materials Needed: To do the complete cleaning of your PS4, you will need the following materials:

• A Philips wrench A torx wrench (one with the six-point end in star format) A brush for cleaning Other cleaning materials such as cloths and sponges Thermal paste Isopropyl alcohol

To carry out this process in an organized way, we will start from the disassembly, we will do the cleaning and we will teach you how to assemble your PlayStation 4. Pay attention to each step and, if you need it, record each stage of the disassembly of your console taking a photo not to forget the steps when you have to mount it again.

Also remember to store and separate each screw that you remove from the console very well. During the assembly of the PS4 no part can be missing or left over. Therefore, choose a suitable place to do the procedure, preferably bright, flat and wide. And be organized with all the components of your console.

Remove the hard drive

The first step is to remove the HD, one of the most sensitive parts of the PS4. Therefore, be very careful in this step. The HD sits underneath the glossy top of the cover, and comes out relatively easily if forced a bit out. When you make this movement, gradually increase the force so as not to damage the components.

We recommend reading our guide to the best SSDs of the moment.

Remove the rest of the cover

You need to remove the rest of the PS4 cover, that is, all those parts that cover the console. The suggestion is to start at the back, locating the four small stickers that cover the screws.

It is prudent to note that these are the stickers that, if removed during the warranty period, invalidate the official Sony technical support for the PlayStation 4. To remove the screws, use the torx wrench and remember to carefully separate each screw you remove.

Returning to the top of the console, remove the other screws with the torx wrench. To remove the matte cover from the PS4, unlock the front by pulling it out in a motion that requires a little force. You will hear some creaking, indicating that the cover can be removed. From there, you may start to see some dirt, which can be removed.

To remove the bottom of the console, follow the same steps you used on the top cover. At the front of the console, open the lid by pulling it out. Only after hearing a click from each side of the PS4 is it safe to remove the bottom cover. Clean all the dirt that you find on the way.

Remove the power supply

The power supply is accessible from the bottom of the console. To remove it, just use the torx wrench to remove all the screws. Remember to disconnect the cable that is connected to the side of the fountain, which can be a bit difficult if you're not careful.

Removing the source may require a little more effort because of the pins that feed the board. Pay special attention to this part and clean carefully whenever you find dirt.

Remove the components from the logic board

Still at the bottom of the console, the bluetooth antenna needs to be removed. It is that thread that crosses the console. It consists of removing the connector from one side and pulling carefully. Also disconnect the other cables that connect to the logic board.

Remove the blu-ray player

The blu-ray player is the component located next to the cooler. It is necessary to remove the specific screws to loosen the entire assembly. Then you just have to remove it vertically and separate the screws that are different.

If you want to do a superficial cleaning, you can stop here. In this part, it is already possible to access the fan and remove a lot of dirt from your console. However, if you want to deep clean your PS4, and even change the processor thermal paste, go ahead with this ProfessionalReview tutorial.

Remove the logic board

To get to the logic board, rotate the console and remove all the screws that hold the metal shield. Be careful with the small connector that is connected in this part and carefully remove it upwards. Remember to separate the same screws for a good organization. There is a small piece of metal that is fastened with separate screws. Remove it too.

Then remove the metal part that protects the logic board. The plate must not be held by a screw. To remove it, you just have to pull vertically. After removing it, you can see the processor and the thermal paste that needs to be replaced. However, you are not going to change the thermal paste yet; You will continue cleaning the console.

WE RECOMMEND YOU The best games for PlayStation 4 in 2017

General cleaning

After removing the logic board, the metal shield must be removed. It is only to remove some screws and remove said plate, which brings with it the heat sink. Finally, just unscrew the cooler and pull it out as well.

With all the parts removed, it is time to start the cleaning process, always using dry cloths, a brush and a sponge. You can also vacuum the dirt with a vacuum cleaner or a compressed air blower.

Change the thermal paste

After doing the general cleaning, it's time to go back to the logic board. First of all, remove the battery to avoid any electrical problem. Then clean the thermal paste on top of the processor and the metal piece that covers the logic board. Use isopropyl alcohol with a cotton swab to make your job easier. If necessary, dust off the logic board with the brush.

After cleaning everything, put a small amount of thermal paste on the processor and spread it carefully. Leaves only a thin, even layer.

Reassemble everything

After giving a good cleaning and maintenance to your PS4, it's time to mount everything again. To get started, go back to your console case and install the refrigerator. Next, put on the metal plate that has the heat sink. Remember to use the appropriate screws and fasten all the ends well.

Then install the battery back onto the logic board and carefully place it on the metal board. Above the logic board, place the other metal protection, not forgetting the small piece that goes on the processor.

Remember to reconnect that cable to the side of the logic board.

On the other side, replace the blu-ray player and its screws. Reconnect all the cables you removed during disassembly, remembering to be very careful with the most sensitive cables. Don't forget also about the bluetooth antenna.

Next, install the power supply, making sure it's clean and placed on the correct side. If the screws are well organized, it will be easy to remember where to place each one. After installing the fountain, it only remains to fit the cover on both sides of the console, leaving everything clean.

Reinstall the HD and screw it down to hold it tight. Put on the shiny cover that protects the HD. To finish, remember to put the screws on the back of the console, finishing all the assembly of the PS4.

By following these steps, you will get the best performance from your PS4 console, making it trouble-free and working properly for many years to come.

Have you ever had a problem with your PS4? Have you solved the problem or did this guide help you? Your opinion matters a lot to us!