How to know the data of your pc 【step by step】 ⭐️

It is very important to know the benefits that our computer has to know what it is capable of; In other words, to get the most out of it. We may have a lion under the chassis and we do not know it, so we are going to teach you how to take a look and know the data of the PC we are using Let's go!

Index of contents

Knowing PC data has never been so easy

There are a thousand ways to know what PC we have, so we will expose them below. In this sense, our goal is to know absolutely everything, down to the last detail of our PC. In this way, we will make a more useful and complete tutorial.

Method # 1: Know your operating system

Here we are going to go a little blind because we cannot get into your computers, but we can help you to detect what operating system you have installed, such as the main features. Simply do the following:

Open Start menu and write " Control Panel ".

Choose the icon view option and enter the " System " menu.

Once inside, you can see what version of Windows you have installed, the RAM you have and the processor along with its frequency.

If your equipment is a laptop or a preassembled system, you can know something more about it. You just have to do the following:

Open start menu and type " dxdiag ".

You have several tabs, but in the " System " you can know who the manufacturer is, the version of DirectX, etc. If you go to the " Input " tab, you can see the model of the peripherals, although they may not be shown.

Method # 2: CPU-Z

In my opinion, every team should have this program installed because it is super complete and gives us very useful information. So, if you want to know the data of your PC, you can download it here. We have the information of each component divided by tabs:

CPU: We will see the name of the processor, the TDP, the voltage, the lithography, the frequency of each core, multiplier, BUS speed, cache and the number of cores and threads.

Cache: we can see the cache of each level or level. Mainboard: here we have access to an overview of our motherboard, such as the name, manufacturer, chipset, BIOS version and PCI-Express support.

Memory: this is the section of RAM memory. You can see if it is connected in Dual, Single or Quad Channel, the type of RAM, the size, the frequency and the Timings, in which we will have its latency.

SPD: This tab refers to RAM memory, in which each RAM memory installed in every slot is analyzed. In fact, you can see the manufacturer of the memory, the memory code and if it has the XMP profile installed in BIOS.

Graphics: As expected, it tells us the information of our graphics card, although it does not give us much information. At least, we know what manufacturer it is, the model and its capacity.

The other two remaining tabs are referred to a small benchmark to test the PC and we can know the DirectX that we have installed, such as the Windows 10 version.

Method # 3: get to know your hard drives with CrystalDiskInfo

It is important to know what hard drives we have, their capacity, speed or their state of health. To know how many we have, such as their capacity, it helps us to go to " This team ".

However, what kind of hard drives do I have? What is your rotation speed? What use do they have? These are questions that Windows does not answer, so we have to go to third-party programs, such as Crystaldiskinfo.

Download it and install it on your PC. As we open it, you will see that it will give us a lot of information about our hard drives.

Here we can know what type of hard drive it is, thanks to the " Rotation speed " box. If you put us SSD, it is that it is an SSD; if it is a mechanical HDD, it will give us the rotation speed expressed in RPM (Revolutions Per Minute).

WE RECOMMEND YOU What is RAM and how does it work?

Just below, we will see the number of times it has been turned on and the hours turned on. It is difficult to make a quick diagnosis, but we can know the state of the hard drive with an approximation: if it has more than 30, 000 hours on, it could be said that it has been in prolonged use. Below, we don't usually see hard drives in poor health.

Method # 4: know data from your monitor

In some monitors we can know the model, its inches or its technology through the sticker on the back. Some may not wear it, which makes the job a little more difficult. The truth is that we can know, for example, its refresh rate. Do the following:

Right click on the desktop and you give " screen settings ".

We scroll down and access " Advanced screen settings ".

We get into " show properties of display adapter ". Here you will see the specifications of the monitor. You will get a window in which we can see the BIOS of the graphics card, capacity, etc. We go to the " Monitor " tab and click on the drop-down of " Screen refresh rate "

To know what response time we have or what panel we have, we will have to look behind to find out.

Method # 5: power supply or heatsink

Unfortunately, these two components cannot be known through the installation of programs. Therefore, I am sorry to inform you that you will have to open the chassis to know what power supply you have installed or what heatsink you have. In fact, you may not know the heatsink model by physically seeing it.

In the power supply they do usually have a sticker with everything relevant. We know that many of you cannot open the chassis because you lose the warranty, so never open it under these circumstances.

We hope that this tutorial has been helpful to you in order to know the details of your PCs. If you have any questions, you can leave them to us in the comments section and we will be happy to answer them.

We recommend the best PCs on the market

What team do you have? Have these methods helped you to know which PC you have? Which more do you know?