Fractal design meshify c review in Spanish (full analysis)

We continue to analyze PC chassis for users looking for the best, Fractal Design Meshify C is a model that bets on the best quality design, aesthetics the order of the day, and the best cooling possibilities so you can get the most out of it. possible match to your precious hardware. Keep reading this post if you want to know all the secrets of this beauty.

Will this chassis be worth it? We will tell you everything you need to know about it. Here we go!

First of all, we thank Fractal Design for the trust placed in transferring the product to us for analysis.

Fractal Design Meshify C technical characteristics

Unboxing and design

Fractal Design has put a lot of care into the presentation of the chassis so that it reaches us in the best possible conditions. The manufacturer has chosen a large cardboard box to pack the product, inside we find several pieces of cork that accommodate the Fractal Design Meshify C to prevent it from moving during transport.

The chassis is covered by a plastic bag, something important to protect its delicate surface and that it does not suffer any type of scratch or damage. As we can see, it is a very careful presentation, something that is appreciated by the brand.

Next to the chassis we find the documentation and all the accessories necessary for the assembly of the equipment, in this way we will not have to buy anything else.

Fractal Design Meshify C is an ATX semi-tower with measures of 453 mm x 409 mm x 217 mm and a weight of 6.5 Kg. High quality steel, tempered glass for the window, and plastic for the front have been used for its construction.. All the materials are of very good quality, which gives a very premium look to this chassis.

The front of the Fractal Design Meshify C chassis has a fairly minimalist design and a micro-perforated finish, which will allow a greater volume of air to enter the fans on this part. As usual, we did not find any 5.25-inch bay for optical drives, which are less and less used, so most manufacturers decide to do without them in favor of better ventilation. You will like this decision or not depending on your preferences. The manufacturer includes in this area two 120mm fans, which are protected by a dust filter.

We now look at the top of Fractal Design Meshify C, here we find the I / O panel with two USB 3.0 ports, 3.5 mm connectors for audio and micro and the power and reset buttons. In this area we can also put two 120mm or 140mm fans to improve air flow. These fans are also protected by a dust filter.

A large tempered glass window has been mounted on the main side, which occupies the entire panel and looks great.

This window is fixed with four hand screws, which we can easily remove to access the inside of the chassis. Thanks to the window, we can enjoy the aesthetics of the components, something that every manufacturer cares for more and more.

We have a fairly simple design on the right side. We do not have any relevant details to highlight in this area of the tower.

At the rear we see the power supply area in the lower area of the chassis, the ideal location to take fresh air directly from outside through the bottom of the chassis. We can put a source with a length of up to 17.5 cm. In this area we also see the seven expansion bays, and the 120mm fan at the top.

We now turn to see the lower area, where we can put another 120 mm fan to put fresh air into the equipment.

We also see the dust filter that will protect the power supply, and the four legs finished in rubber to avoid vibrations on the table or the floor.

Interior and assembly

Once we have seen the exterior, we look inside the Fractal Design Meshify C. As for the motherboard, we can mount an ATX, Micro ATX and Mini ITX model, which offers us many possibilities in this regard.

There's also enough room for a CPU cooler with a maximum height of 165mm and graphics cards with a length of 315mm. As we can see, it is a chassis that will offer us good possibilities when mounting a powerful team, with a large heatsink and an advanced graphics card.

The space behind the motherboard is enough to do a good management of the wiring, something that will allow us to enjoy a clean and free assembly of loose cables, very important so that it does not harm the cooling, and have a better aesthetic.

As for storage, we find four bays for hard drives, two of them 2.5 inches and the other two 3.5 inches, it is not a chassis that is especially left over in this regard, but we should not have problems.

We also see the possibilities of the Fractal Design Meshify C for fans of liquid cooling, the chassis offers us the possibility of mounting a 120/140/240/280/360 mm front radiator, a 120/240 mm upper one and a rear one 120 mm.

Finally, we leave you some images of how the assembly of some of our equipment has been. Everything quite simple, fast and without any complications. It can be seen that Fractal has been manufacturing very good chassis for many years. Good job!

Final words and conclusion about Fractal Design Meshify C

The Fractal Design Meshifty C is a mid-range chassis with very good features. It can be defined as a minimalist and very spacious box. It has a tempered glass window and the possibility of choosing between air cooling or fixing a compact liquid cooling on the front or the roof.

Few buts we can get out of this tower. It incorporates filters, a fairing that separates the power supply and hard drives from other components, space for high-end components (heatsinks and graphics cards) and a super nice front.

We recommend reading the best chassis on the market

How about the montage? Super easy and simple! Fractal is not complex, and that is always appreciated. As we have seen, we have mounted an AMD Ryzen 7 2700X, 16 GB of DDR4 RAM, a 6 GB GTX 1060 and a fantastic X470 motherboard. How everything looks!

Currently we can find it for 89.99 euros. We believe that it is an excellent product and worth its purchase. Although we would have liked to compare it with the Fractal Define R6, which on paper is of much higher quality.

ADVANTAGE	DISADVANTAGES
+ DESIGN AND QUALITY
+ COMPATIBILITY WITH HIGH-END PROCESSORS AND GPUs
+ ALLOWS TO INSTALL LIQUID COOLING
+ FAIRING THAT SEPARATES PSU FROM THE REST OF COMPONENTS
+ GOOD PRICE