Internet

Thermaltake commander g30, a box of three models with 200mm rgb

Table of contents:

Anonim

Thermaltake's core range is about to be revamped with three new Commander G units, which share the same chassis and the default use of a 200mm fan running at 600RPM on the front panel and with addressable RGB lighting.

Thermaltake Commander G30, a box of three models with 200mm RGB

In the entire Commander G series we find a nine diode Pure 20 ARGB fan. And since it's installed at the bottom, there's plenty of room to put a second right underneath; or replace everything with three 120mm fans, with the possibility in any case of installing a 360mm radiator.

In short, a box that allows air and light to pleasure, with the added advantage of a massive use of the mesh. Connections are on the top of the box with a USB 3.0 port, two USB 2.0 ports, and sound, plus the Power, Reset, and RGB buttons.

Visit our guide on the best PC cases on the market

The dimensions of the boxes vary depending on the front panel, but we always use the ATX medium tower format. The chassis is also fully ATX compliant, with plenty of room for standard components. We will be able to install graphics cards up to 300mm in length with support for 7 + 2 PCI mounts and heat sinks for the 175mm processor. The power supply, which is in the lower area, should not exceed 160 mm or 200 mm, depending on whether or not the hard drive bay is used.

This offer is completed with support for 120mm or 140mm radiators at the top, with a limit of 240mm.

There is no price or availability date at the moment.

Internet

Editor's choice

Back to top button