In win 303 review (analysis in Spanish)

Features In Win 303

Unboxing and exterior

The In Win 303 comes protected in a large cardboard box that will prevent any damage during transport. Once we open it we find a cloth bag that wraps around the tower and protections that prevent movement of the tower.

Once we open the box we find:

In Win 303 box. Quick guide. Flanges. Graphics card adapter. Hardware required for installation.

The In Win 303 is a PC case made of the highest quality steel to achieve a very robust design although its weight is greater than if aluminum, a much lighter material, had been used. This chassis is very elegant and has some finishes that denote the care that the manufacturer has put into the product, this box is undoubtedly the one that offers the best value for money in the In Win catalog.

The exterior of the In WIn 303 is dominated by a large window present and made of tempered glass. The most fanatical will be able to admire its precious hardware in all its splendor while it is working.

We also find an illuminated front panel that contains a pair of USB 2.0 ports along with another pair of USB 3.0 ports to achieve a high speed of data transfer in devices that make use of it, for example, external SSD drives or high-performance USB sticks.

We also find the usual 3.5 mm Jack connectors for audio and micro and a great brand logo.

On the opposite side to that of the large tempered glass window, we find a classic hexagonal-shaped grille that aims to improve the air flow of the box, once again the care that the manufacturer has put into the design is clear of the In Win 303 so as not to leave anyone indifferent.

As we can see the two screws that hold the lid, they can be loosened without the need for tools.

In the rear area we find the space for the power supply, the rear plate, a 120 mm fan and the expansion slots.

The same grille is found under the window and with the capacity to install up to three fans in a very comfortable way, this is a chassis in which air flow will not be a problem.

Already in the lower part of the chassis we find a dust filter that will serve to clean the air from the fans that we can install in the lower part of the chassis.

This is removed by pushing to the side and will come out as follows. Very comfortable!

In Win 303 interior

We now turn to look at the inside of the In Win 303 and immediately we see an exquisite design, we find on the side the hexagonal grille that we have mentioned before and that contains the necessary holes to install up to 3 120 mm fans in order to generate excellent air flow.

The box is compatible with motherboards with ATX, microATX and Mini-ITX formats. Among its dimensions we find 500 x 215 x 480mm and a weight of 10.88 kg. It also has 7 expansion slots to connect high-end graphics cards.

We are still talking about fans and this chassis also allows us to install three 120mm fans at its bottom, next to the aforementioned air filter. Six fans that added to the rear gives us a total of up to 7 120mm fans, cooling should not be a problem in the In Win 303. The negative point is found in the absence of the possibility of installing fans at the front , Although it will not be a problem, if we know how to redirect the refrigeration correctly.

If you are not convinced by the air cooling capacity of the In Win 303 you can still go to the handy liquid cooling, this chassis offers enough space on the side and allows you to install a 360mm radiator to mount a liquid cooling system if you want achieve the best possible temperatures on your hardware.

This is not all because you can place a second 360mm radiator at the bottom, although this already depends on the dimensions of the motherboard you want to place. All high performance liquid cooling requires a pump and the In Win 303 will allow you to install one to complete the circuit. A good gap is as follows:

The power supply is installed at the top, as it should be since it is the best location to achieve a cleaner air flow inside the chassis, thus we also avoid that our power unit eats all the heat that is generated by the rest of the components of our system. It would be unforgivable in a chassis of these characteristics to find the mounting space of the PSU at the top.

Cable management is also something to take into account when designing a high-performance equipment, fortunately the In Win 303 also takes good note in this section and allows a remarkable cable management to achieve a cleaner air flow and therefore better cooling of the components that we install. Although we also miss some rubber protections to improve the quality of the wiring.

Now we look at the storage options, we see a total of two bays that will allow us to mount 2.5-inch HDD disks or even better two Sata SSD drives for spectacular performance in Raid 0 mode. These bays also allow installing hard drives of 3.5 inches for those users who require a large storage capacity. Finally, we find two additional 2.5-inch bays, the In Win allows us to install up to four hard drives inside.

WE RECOMMEND YOURazer BlackWidow X Chroma Review (Full Review)

Detail of the internal wiring of the control panel and USB 3.0 connection.

Finishing this section, we leave you an image of the back of the box. Simple and that allows us to organize all the wiring quite easily.

Experience and assembly

Precious right? We have assembled a modest kit on it with an AMD FX8350, a 970 Gaming motherboard, and a Radeon RX 480 on it. And what a great cash.

The box allows us to install graphics cards with a maximum of 350 mm, and as you are seeing we have plenty of space everywhere. It is also compatible with heatsinks up to 16 cm high.

The hollow of the power supply allows us to install any PSU regardless of its length. And even attach pump plus reservoir for custom refrigeration.

The installation of 2.5 ″ disks or SSD is quite fast and as we can see it is quite good. In the rear area it also allows us to install it, in case we think it is appropriate to hide more cables.

Here is a detail of the LEDs on the front on and another view from further away:

In short, the assembly was really fast and without difficulty. It is true that the details of the rubber in the holes to organize the wiring would be one more point in its favor, but it is a box that exceeds with a high-end product.

Final words and conclusion about In Win 303

In Win is one of the best manufacturers of PC cases that have us accustomed to quality products and exquisite finishes. And it is that the In Win 303 can be found in white with details in blue or in full black.

Although it is a robust tower with a minimalist touch, this version in white falls in love with the view and the glass window is a delight. Due to its characteristics, it allows us to install a compact liquid cooling kit or a good air sink. In addition to ATX motherboards and graphics cards with a length of 35 cm. Also note that the front comes equipped with 4 USB 3.0 connectors, an input / output connection, off button and reset button.

Regarding the assembly, it has not been tedious and its handling has been quite good. It really has been one of the fastest we have done in a long time and you have already seen the end result. Outstanding!

Best of all, its retail price is 110 euros, a really affordable price for a user looking for a box for gaming or high performance. We value it as one of the best quality / price options on the market.

ADVANTAGE	DISADVANTAGES
+ BLANK DESIGN IS BEAUTIFUL.	- FAN ON THE FRONT.
+ EXCEPTIONAL PERFORMANCE WITH LIQUID OR AIR COOLING.	- WE MISSING PROTECTIVE RUBBERS IN CABLE PASSES.
+ ALLOWS GRAPHICS CARDS, POWER SUPPLIES AND HIGH PERFORMANCE HEATSINKS.
+ GOOD REFRIGERATION.
+ EXCEPTIONAL PRICE.